A-4 SD460 Laminating System
Unpack the System
Remove the printer and laminator from their shipping cartons.
1. Open the printer shipping carton and remove the printer and its accessories.
2. Open the laminator shipping carton and remove the accessories boxes.
3. Lift the laminator from the carton and remove the foam end caps.
4. Place the laminator on a surface that meets the requirements specified in “SD460 Site
Requirements” on page A-2.
5. Secure the laminator, if necessary. Refer to “Bolt-Down Option” on page A-5.
Save the shipping cartons and packing materials. They are required if you need to
store, move, or return the system for service.
Laminator
Power Supplies
and Cords
Packing Materials
(foam end caps)
To Next Page
Loading...
