DataCard SD460 Installation And Administrator's Guide

52 Printer Manager
Update Current Values as needed, and then click Set Current to apply changes.
 ActivityLogExternal—Enable or disable writing the activity log to an external server.
 ActivityLogInternal—Enable or disable the internal activity log.
 ContactAutoDetect—This setting supports legacy smart card clients. It overrides the smart
card protocol sent by the client to the printer and uses SCARD_PROTOCOL_T0_OR_T1. The
setting is set to Disabled by default.
 ContactlessATRMode—Select the default ATR mode for the DUALi contactless smart card
reader. The possible values are:
 Vendor—Uses the ATR mode specified by the vendor. The generated ATR may not be
compatible with all smart card applications or card types.
 PCSC—Uses the PC/SC protocol to generate the ATR.
 CCID—Uses the CCID protocol to generate the ATR.
 Legacy—Uses the ATR mode currently in use by the reader. This is the default value.
 AppSpecifies—Allows the smart card application to control the ATR mode.
 CPX—Enable or disable the CPX communications protocol used by some Datacard systems.
 DataStorageSecure—Allows you to encrypt the data stored on the printer’s internal SD card.
Encrypting data provides extra security in the event the printer is stolen or disassembled and
the SD card removed. Once data is encrypted, there is no impact on performance of the
printer.
 Enabled—Encrypts the printer data. Restart the printer after you select Enabled. The
printer encrypts the data during the startup process. Encrypting the internally stored
data takes approximately 20 minutes. the printer cannot be used until the encryption
operation completes.
 Disabled—Disables encryption of the internal printer data. When you select Disabled
and restart the printer, the data is decrypted during printer shutdown. The decryption
process takes approximately 20 minutes. The printer restarts when the decryption is
complete. Disabled is the default setting for DataStorageSecure.
 DPCL—Enable or disable DPCL command access to the printer through the non-secure port.
DPCL must remain enabled when you use the XPS Card Printer Driver.
 DPCL2—Enable or disable DPCL2 command access to the printer through the non-secure
port.
A smart card application may specify to receive the ATR in a different format
regardless of this setting. However, when the printer restarts, the smart card
reader returns to the setting specified here. Consider whether you want to
specify the format on a job-by-job basis or modify the Printer Manager setting
to use the desired ATR format.

DataCard SD460 Specifications

General

Color	Yes
Card size	85.6 x 53.98 mm
Card types	Magnetic stripe (ISO 7811), PVC, Smart card
Print technology	Dye-sublimation/Resin Thermal transfer
Duplex print speed (color)	200 card/h
Display	LCD
Certification	cULus, FCC, I.C., CE, Ctick, VCCI, RoHS, WEEE, CCC, KCC
Product color	Black, Blue
Internal memory	128 MB
Built-in barcodes	1D, 2D
Total input capacity	100 sheets
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Wi-Fi	No
USB version	2.0
Ethernet interface type	Fast Ethernet
Storage temperature (T-T)	-15 - 60 °C
Operating temperature (T-T)	15 - 35 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Weight	13600 g
Dimensions (WxDxH)	589 x 270 x 513 mm