DataCard SD460 Installation And Administrator's Guide

SD260L/SD360/SD460 Installation and Administrator’s Guide 81
 TestPatternPaleBlue—Use this test to identify print intensity issues that can appear as
wrinkles on the printed card. This option prints a lighter blue color card than
TestPattern3. The monochrome test card prints several lines of Katakana text on the card.
 TestPatternManufacture A–E—These test cards are used only during manufacturing
setup.
 Lamination Options—Use this test to determine whether a laminator system is applying
overlay material properly. You can select from the following lamination options:
 L1 Front—Applies overlay from the L1 laminator to the front of the card.
 L1 Back—Applies overlay from the L1 laminator to the back of the card.
 L1 Front L1 Back—Applies overlay from the L1 laminator to the front and back of the
card.
 L2 Front—Applies overlay from the L2 laminator to the front of the card.
 L2 Back—Applies overlay from the L2 laminator to the back of the card.
 L2 Front L2 Back—Applies overlay from the L2 laminator to the front and back of the
card.
 L2 Back L1 Front—Applies overlay from the L2 laminator to the back of the card, and
overlay from the L1 laminator to the front of the card.
 L2 Front L1 Back—Applies overlay from the L2 laminator to the front of the card, and
overlay from the L1 laminator to the back of the card.
 Debow—Select this option to apply the debow action when an overlay is applied to the card.
 Impress—Select this option to impress a card, if an impresser is installed.
 Copies—Enter the number of test cards to print for each test, from 1 to 10.
 Park Smart Card—Select this option to park the test card in the smart card bay. The test does
not transmit any data, but is used to test the movement of the card into, and out of, the bay.
 Smart Card Park Time—Enter the amount of time to hold the test card in the smart card bay,
from 0 to 300 seconds.
 Do not eject card—Select this option to prevent the test card from being ejected from the
printer.

DataCard SD460 Specifications

General

Color	Yes
Card size	85.6 x 53.98 mm
Card types	Magnetic stripe (ISO 7811), PVC, Smart card
Print technology	Dye-sublimation/Resin Thermal transfer
Duplex print speed (color)	200 card/h
Display	LCD
Certification	cULus, FCC, I.C., CE, Ctick, VCCI, RoHS, WEEE, CCC, KCC
Product color	Black, Blue
Internal memory	128 MB
Built-in barcodes	1D, 2D
Total input capacity	100 sheets
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Wi-Fi	No
USB version	2.0
Ethernet interface type	Fast Ethernet
Storage temperature (T-T)	-15 - 60 °C
Operating temperature (T-T)	15 - 35 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Weight	13600 g
Dimensions (WxDxH)	589 x 270 x 513 mm