DataCard SR300 User Manual

62 Printer and Laminator Settings
Gateway TheprinterdoesnothaveadefaultIPv6gateway.If
AdrsConfigissettoAutoandtheprinterisnot
connectedtoanetwork,Noneisdisplayed.
SessionTimeOut Showshowmanyminutesthedriverwaitswithout
usingtheprintertostopthenetworksessionbetween
thePCandprinter.Settings
areOFForupto60
minutes.
MACAddress TheMACaddressisuniquetoeachprinter.TheMAC
addressisdisplayedandcannotbechanged.
IPSecMode
 ON
 OFF
DisplayswhetherInternetProtocol(IP)securityisonor
off.
AftersettingupsecurityusingaPCandUSB
connection,thissettingcannotbechanged.
IPSecType
 notSetting
 Preshard
 Certificate
DisplaysthetypeofIPsecuritysetusingtheStatus
Monitor.
 NotSetting:NoIPSecurity.
 Preshard:Usesapresharedkeyforencryption.
 Certificate:Usesapublickeycertificatefor
encryption.
MenuDisplay Settings Function

DataCard SR300 Specifications

General

Brand	DataCard
Model	SR300
Category	Printer
Language	English