Elrepho 3000
The following calibration options are available from this mode:
Current Job Calibrates all measurement conditions
needed for the current job
All Jobs Calibrates all measurement conditions defined
for all jobs currently stored in the instrument
All View Calibrates all measurement conditions for all
Areas viewing areas
XLAV Calibrates only the Extra Large Area view
conditions
Calibration
Instrument Calibration Mode (cont)
SAV Calibrates only the Small Area View Conditions
USAV Calibrates only the Ultra Small Area View
conditions
White standard and black trap measurements will be performed
with the UV filter in the UVINC, UVEXC (400nm cutoff filter),
Datacolor International
13
To Next Page
Loading...
Need help?
General
