Elrepho 3000
While in the Measurement Mode, the soft keys are labeled as
follows:
RESET BACK
RESET Cancels all measurements made for this sample,
and restarts the measurement process at the first
step. You will be prompted as required to set up
the instrument and perform measurements.
Measurement Mode
BACK When displayed, it will cancel the last set of
readings. If you are sample averaging, only the
last sample measurement will be cancelled.
After you complete all measurements for the sample, the program
will exit the Measurement Mode and enter the Display Mode.
The measurement results can then be viewed and saved.
Datacolor International
15
To Next Page
Loading...
