D-500L Firmware V-5.8
K35D03-EN - 2 -
Any unauthorized use or copying of the contents or any part of this document is prohibited.
This applies in particular to trademarks, model denominations, part numbers and drawings.
This document describes minimum requirements and necessary steps for the successful installation of
the D-xxx family units.
Follow carefully advices given in the document. These are often good practices for the installation of
genset control units which reduce future issues.
For all technical queries please contact Datakom at below e-mail address:
datakom@datakom.com.tr
If additional information to this manual is required, please contact the manufacturer directly at below e-
mail address:
datakom@datakom.com.tr
Please provide following information in order to get answers to any question:
- Device model name (see the back panel of the unit),
- Complete serial number (see the back panel of the unit),
- Firmware version (read from the display screen),
- Measuring-circuit voltage and power supply voltage,
- Precise description of the query.
Rainbow Plus D-500 D-700 Installation Guide
Rainbow Plus D-500 D-700 Usage Guide
GSM Configuration Guide for D-500 D-700
Firmware Update Guide for D-500 D-700
Modbus Application Manual for D-500 D-700
500-Rainbow Scada Installation
Rainbow Scada Installation Guide
Rainbow Scada Usage Guide
To Next Page
Loading...
Need help?
General
