Datalogic Gryphon I GBT4400 2D User Manual

Scan Modes ..................................................................................................35
Pick Mode ..........................................................................................37
Multiple Labels in a Volume .......................................................37
Technical Specifications ..........................................................................38
LED and Beeper Indications ...................................................................42
Error Codes ..................................................................................................45
Base Station Indications ..........................................................................46
Statement of Agency Compliance ......................................................47
FCC Class B Compliance Statement .........................................47
FCC RF Radiation Exposure Statement........................ 48
Canadian Notice ..............................................................................48
Power Supply ...................................................................................48
Imager Labeling ..............................................................................49
Aiming System...................................................................... 49
WEEE Statement ..............................................................................54
Warranty .......................................................................................................55
Ergonomic Recommendations .............................................................56
Services and Support ...............................................................................57

Datalogic Gryphon I GBT4400 2D Specifications

General

Scanner Type	2D Imager
Connectivity	Bluetooth
IP Rating	IP52
Print Contrast Ratio (Minimum)	25%
Interface	USB, RS-232, Keyboard Wedge
Operating Temperature	0 to 50 °C / 32 to 122 °F
Storage Temperature	-20 to 70 °C / -4 to 158 °F
Drop Resistance	1.8 m (6 ft) to concrete
Weight	245 g / 8.64 oz
Dimensions	18.1 x 7.1 x 10.0 cm / 7.1 x 2.8 x 3.9 in
Light Source	Red LED
Image Sensor	CMOS
Decode Capability	1D / 2D / Postal / Stacked codes
Scanning Technology	Imaging
Resolution	752 x 480 pixels
Skew Angle	+/- 65°
Humidity	5 to 95% non-condensing
Drop Specification	1.8 m (6 ft) to concrete
Power Supply	5 VDC +/- 5%
Beeper	Yes
Indicators	LEDs, Beeper
Supported Barcodes	All standard 1D and 2D barcodes