Reading Parameters
124 Gryphon™ I GD/GBT/GM4500
Pick Mode
Specifies the ability of the reader to decode labels only when they are close to
the center of the aiming pattern. This allows the reader to accurately target
labels when they are placed close together, such as on a pick sheet.
The Pick Mode can be en
abled only in Trigger Single Scan Mode.
NOTE
This feature is not compatible with Multiple Labels Reading in a Volume.
Pick Mode = Disable
Pick Mode = Enable
Aiming Pointer
Enables/disables the aiming pointer for all symbologies.
Aiming Pointer = Disable
Aiming Pointer = Enable
DEFAULT
To Next Page
Loading...
