Datalogic Gryphon I GM4500 - I 2 of 5 Check Character Transmission; I 2 of 5 Length Control

1D Symbologies Enter/Exit Programming Mode
Product Reference Guide 171
I 2 of 5 Check Character Transmission
Enable this option to transmit the check character along with I 2 of 5 bar code
data.
NOTE
I 2 of 5 Check Character Transmission = Don’t Send
I 2 of 5 Check Character Transmission = Send
DEFAULT
This feature is valid only when I 2 of 5 Check Character Calculation is enabled.
I 2 of 5 Length Control
This feature specifies either variable length decoding or fixed length decoding
for the I 2 of 5 symbology.
Variable Length: For variable length decoding, a minimum and maximum length
may be set.
Fixed Length: For fixed length decoding, two different lengths may be set.
DEFAULT
I 2 of 5 Length Control = Variable Length
I 2 of 5 Length Control = Fixed Length
$CI2CT00
$CI2CT01
$CI2LC00
$CI2LC01