Wireless Features Enter/Exit Programming Mode
Product Reference Guide 263
BT PIN Code
After enabling Security Mode (see "BT Security Mode" on page 262), specify
whether you want to set a 4-digit or a 16-digit PIN Code.
See page 301 for
detailed information and examples for setting this feature.
Select 4-character BT PIN Code
DEFAULT
Select 16-character BT PIN Code
Select PIN Code Length
Set PIN Code
Determine the desired characters for the PIN code, then convert to hexadecimal
using the ASCII Chart on the inside back cover of this manual. See page 301 for
detailed information and examples for setting this feature.
Set 4-character BT PIN Code
To configure this feature, scan the ENTER/EXIT PROGRAM-
MING MODE bar code above, then the bar code at left fol-
lowed by the digits from the Al
phanumeric characters in
Appendix D, Keypad
representing your desired charac-
ter(s). End by scanning the ENTER/EXIT bar code again.
Set 16-character BT PIN Code
CANCEL
Make a mistake? Scan the CANCEL bar code to abort and
not save
the entry string. You can then start again at the
beginning.
31323334 = Default PIN Code is 1234
To Next Page
Loading...
