1D Symbologies Enter/Exit Programming Mode
Product Reference Guide 207
Code 93 Check Character Transmission
Enables/disables transmission of an optional Code 93 check character.
Code 93 Check Character Transmission = Disable
Code 93 Check Character Transmission = Enable
Code 93 Length Control
This feature specifies either variable length decoding or fixed length decoding
for the Code 93 symbology.
Variable Length:
For variable length decoding, a minimum and maximum length
may be set.
Fixed Length:
For fixed length decoding, two different lengths may be set.
DEFAULT
Code 93 Length Control = Variable Length
Code 93 = Fixed Length
To Next Page
Loading...
