Scanning Features
Product Reference Guide
131
MULTIPLE LABEL READING
In standard (default) mode, when the reader’s aiming system is activated (by a
trigger pull, motion or other method depending on the mode), it then acquires
and processes each image in the area in front of it (the Volume). In this case,
the scanner stops processing the image once it decodes a label. If several labels
are present in the volume, only the first label encountered is decoded and sent.
When Multiple Reading Mode is enabled, the scanner keeps on processing the
im
age until all the labels present are decoded. The reader then sorts the data
from all the bar codes (if configured to do so) before transmitting it.
Multiple Labels per Frame
Specifies the ability of the reader to decode and transmit a set of code labels in
a specific volume and in a single frame of time. When in Multiple Labels per
Frame the reader beeps and turns on the good read LED indication for each
code read in a frame.
When Multiple Labels Mode is enabled, ISB
T pairing, ABC Codabar pairing, and
composites are not allowed.
Multiple Labels per Frame = Disable
Multiple Labels per Frame = Enable
To Next Page
Loading...
