Datalogic QD2100 User Manual

310 QuickScan® QD2100
N
numbers lock key 71
P
Performance Characteristics 267
Physical Characteristics 267
Pitch – Good Read, Beeper 23, 24
Pitch Tolerance 267
Prefix/Suffix 90
Print Contrast Minimum 267
Product Specifications 267
Programming Barcodes 8
R
Read, Beeper – Good 21
Read, Beeper Pitch – Good 23, 24
Read, Beeper Volume – Good 26
Request to Send 46
Roll (Tilt) Tolerance 267
RS-232 interface selection 12
RS-232 Serial Connection 6
RTS 46
S
sample bar codes
code 128 287
code 39 287
interleaved 2 of 5 288
select digits/characters 291
Serial Output 269
Skew (Yaw) Tolerance 267
Standard Cable Pinouts 269
Suffix 90
symbology types 287
T
Table Top Scanner 82
U
UPC 112
USB Connection 7
USB interface selection 12
User Environment 268
V
Volume – Good Read, Beeper 26
X
XON/XOFF 46

Datalogic QD2100 Specifications

General

Scanner Type	Linear Imager
Environmental Sealing	IP42
Operating Temperature	0 to 50 °C / 32 to 122 °F
Scan Rate	270 scans/sec
Interface	RS-232, Keyboard Wedge, USB
Drop Resistance	Withstands drops from 1.5 m / 5.0 ft onto concrete
Print Contrast Ratio	15%
Decode Capability	All standard 1D barcodes
Resolution	0.102 mm / 4 mils
Storage Temperature	-20 to 70 °C / -4 to 158 °F
Humidity	5 to 95% non-condensing
Electrical Safety	EN60950-1
EMC	EN 55022
Light Source	LED (red)