Symbologies
136 QuickScan
TM
QD2100
EAN 8
The following options apply to the EAN 8 (Jan 8) symbology.
EAN 8 Enable/Disable
When disabled, the reader will not read EAN 8/JAN 8 bar codes.
ENTER/EXIT PROGRAMMING MODE
EAN 8 = Disable
EAN 8 = Enable
EAN 8 Check Character Transmission
Enable this option to transmit the check character along with EAN 8 bar code data.
ENTER/EXIT PROGRAMMING MODE
EAN 8 Check Character Transmission = Don’t Send
EAN 8 Check Character Transmission = Send
To Next Page
Loading...
