Datalogic QuickScan i QD2100

Symbologies
298 QuickScan
TM
QD2100
Plessey — cont.
Plessey Check Character Transmission
Enables/disables transmission of an MSI check character.
ENTER/EXIT PROGRAMMING MODE
Plessey Check Character Transmission = Disable
Plessey Check Character Transmission = Enable
DEFAULT
PLessey Length Control
This feature specifies either variable length decoding or fixed length decoding for the
Plessey symbology.
Variable Length — For variable length decoding, a minimum and maximum length may be
set.
Fixed Length — For fixed length decoding, two different lengths may be set.
ENTER/EXIT PROGRAMMING MODE
DEFAULT
Plessey Length Control = Variable Length
Plessey = Fixed Length