Datalogic QuickScan i QD2100 User Manual

Data Editing
100 QuickScan
TM
QD2100
Global AIM ID
NOTE
This feature enables/disables addition of AIM IDs for all sym-
bology types.
AIM label identifiers (as opposed to custom characters you select yourself as with label
identifiers) can be included with scanned bar code data. AIM label identifiers consist of
three characters as follows:
• A close brace character (ASCII ‘]’), followed by...
• A code character (see the table below), followed by...
• A modifier character (the modifier ch
aracter is symbol dependent).
SYMBOLOGY
CHA
R
SYMBOLOGY
CHA
R
UPC/EAN
E
a
a.
UPC-A and UPC-E labels are converted to EAN 13 when adding AIM IDs.
Code 128/GS1-128 C
Code 39 and 
Code 32
A
GS1 DataBar Omnidirec-
tional, GS1 DataBar
Exp
anded
e
Codabar F Standard 2 of 5 S
Interleaved 2 of 5 I ISBN
X
b
b.
ISBN (X with a 0 modifier character)
Code 93 G Code 11 H
Figure 5. AIM ID
Prefix SuffixLabel ID Label IDBar Code DataAIM ID

Datalogic QuickScan i QD2100 Specifications

General

Scan speed	8 sec/page
Wavelength	610 nm
Tilt angle range	-65 - 65 °
Decoding standards	1D / GS1 DataBar China Post GS1 DataBar Expanded/ Stacked/ Stacked Omnidirectional
Dimensions (WxDxH)	170 x 66 x 71 mm
Standard interfaces	RS-232, USB, Keyboard wedge
Input voltage	5 V
Power consumption	340 mA
Product color	White
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Weight	121.9 g