Symbologies
308 QuickScan
TM
QD2100
Code 93 — cont.
Code 93 Check Character Transmission
Enables/disables transmission of an optional Code 93 check character.
ENTER/EXIT PROGRAMMING MODE
Code 93 Check Character Transmission = Disable
Code 93 Check Character Transmission = Enable
Code 93 Length Control
This feature specifies either variable length decoding or fixed length decoding for the
Code 93 symbology.
Variable Length —
For variable length decoding, a minimum and maximum length may be
set.
Fixed Length —
For fixed length decoding, two different lengths may be set.
ENTER/EXIT PROGRAMMING MODE
DEFAULT
Code 93 Length Control = Variable Length
Code 93 = Fixed Length
To Next Page
Loading...
