Codablock F
Product Reference Guide
319
Codablock F — cont.
Codablock F EAN Enable/Disable
Enables/Disables the Codablock F EAN subtype (code with FNC1 in the first position).
ENTER/EXIT PROGRAMMING MODE
DEFAULT
Codablock F EAN = Disable
Codablock F EAN = Enable
Codablock F AIM Check
Specifies if Check Digit calculation algorithm is AIM compliant or not.
ENTER/EXIT PROGRAMMING MODE
Codablock F AIM Check = Disable
Codablock F AIM Check = Enable Check C
To Next Page
Loading...
