Datalogic QuickScan i QD2100

Symbologies
288 QuickScan
TM
QD2100
MSI — cont.
MSI Check Character Transmission
Enables/disables transmission of an MSI check character.
ENTER/EXIT PROGRAMMING MODE
MSI Check Character Transmission = Disable
MSI Check Character Transmission = Enable
DEFAULT
MSI Length Control
This feature specifies either variable length decoding or fixed length decoding for the
MSI symbology.
Variable Length — For variable length decoding, a minimum and maximum length may be
set.
Fixed Length — For fixed length decoding, two different lengths may be set.
ENTER/EXIT PROGRAMMING MODE
DEFAULT
MSI Length Control = Variable Length
MSI = Fixed Length