Datalogic QuickScan i QD2100

Symbologies
264 QuickScan
TM
QD2100
Standard 2 of 5 — cont.
Standard 2 of 5 Minimum Reads
This feature specifies the minimum number of consecutive times a Standard 2 of 5 label
must be decoded before it is accepted as good read.
ENTER/EXIT PROGRAMMING MODE
Standard 2 of 5 Minimum Reads = 1
Standard 2 of 5 Minimum Reads = 2
DEFAULT
Standard 2 of 5 Minimum Reads = 3
Standard 2 of 5 Minimum Reads = 4
Standard 2 of 5 Decoding Level
NOTE
The Standard 2 of 5 Decoding Level feature is set using 2 of 5
Decoding Level on page 205
.