Datamax A-Class A-6310 User Manual

A-Class 41
Printer Options (continued)
Menu Item Details
BARCODE COUNT
Specifies a number of bar codes per label then
generates a fault if the number present is incorrect,
where:
00 (0 - 99) Sets the number of bar codes to count, where 00
(Auto Mode) allows a variable number.
; If bar codes are sent as bitmaps, enter the
minimum number to be read on each label.
(Check your software application for questions
regarding the bar code generation method.)
MIN READABLE HEIGHT
Ensures bar code integrity by setting a minimum
distance for identical decodes, where:
DISABLED Uses REDUNDANCY LEVEL to ensure bar code
integrity.
1/16 – ½ in.
(1.5 – 12.5 mm)
Sets the read height (e.g., a setting of ¼ requires .25
inches of the bar code height be 100% readable).
; The specified distance should not exceed 50% of
the measured bar code height.
REDUNDANCY LEVEL
Ensures bar code integrity by specifying a consecutive
number of identical decodes, where:
READ BARCODE 2X
(1X – 6X)
Sets the read count (e.g., a 3X setting requires three
identical decodes to pass).
; High redundancy rates and fast print speeds may
cause erroneous read failures when scanning
small or multiple bar codes.
AUTO
Uses MIN READABLE HEIGHT to ensure bar code
integrity.
IGNORE NO DATA Allows an override of data verification, where:
DISABLED
Checks for correct data in the bar code(s).
ENABLED Ignores the data present in the bar code(s).
SET DEFAULTS
Allows the scanner default values to be restored,
where:
YES Restores the scanner default settings.
NO
Exits the menu item without changing the current
settings.

Datamax A-Class A-6310 Specifications

General

Brand	Datamax
Model	A-Class A-6310
Category	Label Maker
Language	English