Datamax A-Class A-6310 User Manual

60 A-Class
Communications (continued)
Menu Item Details
SET FACTORY DEFAULTS
Returns the factory-programmed values, where:
YES Restores the default settings.
; The reset will be automatic; all settings will be
restored except CUSTOM ADJUSTMENTS and
calibrations.
NO
Exits the menu item without changing the current
settings.
HOST SETTINGS
Sets host communication parameters, where:
HOST TIMEOUT
Sets the idle period before interface port timeout
occurs, where:
10 SEC (1 – 60) Is the time (in seconds) when downloads timeout, and
that must elapse before alternate port or alternate
parser processing can occur.
CONTROL CODES 
Allows changes to the software command
interpretation controls, where:
STANDARD CODES Sets these interpretation codes: Hex 01 = SOH
command; Hex 02 = STX command; count-by = ^;
Hex 1B = ESC; Hex 0x0D = Carriage Return
ALTERNATE CODES
Sets these interpretation codes: Hex 5E = SOH
command; Hex 7E = STX command; count-by = @;
Hex 1B = ESC; Hex 0x0D = Carriage Return
ALTERNATE CODES 2
Sets these interpretation codes: Hex 5E = SOH
command; Hex 7E = STX command; count-by = @;
Hex 1B = ESC; Hex 0x7C = Carriage Return
CUSTOM CODES Sets interpretation codes, where:
SOH STX CR CNTBY
01 02 0D 5E
Are the codes according to your definitions.
; Standard codes serve as default placeholders.
FEEDBACK CHARACTERS
Allows the return of printer codes, where:
ENABLED
Sends the host a Hex 1E (RS) after each label and a
Hex 1F (US) after each batch successfully prints.
DISABLED
Sends no feedback characters.

Datamax A-Class A-6310 Specifications

General

Brand	Datamax
Model	A-Class A-6310
Category	Label Maker
Language	English