DaVinci Resolve Advanced Panel - Page 55

To use the Scroll mode:
1 Move the playhead to the clip to which you potentially want to copy a new grade. You
can use the PREV SCENE and NEXT SCENE buttons to move around neighboring clips,
or you can use the number keys to jump to a specific clip number or timecode value of
the Timeline.
2 Do one of the following to enter Scroll mode:
 Press SCROLL on the Search Dial panel.
 Press MODE on the T‑bar panel, then press the SCROLL MODE soft key.
 Once you’re in Scroll mode, the Center panel soft menu displays a row of commands with
which to control scrolling through previews of possible grades to copy.
3 Now, do one of the following to preview different grades from other clips:
 Press the PREVIOUS SCENE and NEXT SCENE soft keys to move from clip to clip in the
Timeline, previewing each grade to the current clip.
 Turn the SCROLL SCENES knob to scroll smoothly along multiple clips in the Timeline.
 Turn the SCROLL FRAMES knob to scroll along different frames of any clip, previewing
the effects of keyframed grades at different points in time.
 Press the TOGGLE DECK KEYS soft key to use the transport controls on the Search Dial
panel to play through the Timeline, previewing grades as you go.
 Enter a number on the keypad of the Search Dial panel, and then the SCENE # soft key,
to jump to a clip and preview its grade.
As you scroll from clip to clip, a purple outline indicates the clip with the grade being
previewed and an orange outline indicates the current clip to which you’re previewing each
scrolled grade.
When you’re finished, do one of the following to either accept or reject the currently
previewed grade that you’ve scrolled to;
 Press EXIT AS WAS if none of the grades you scrolled through was suitable. This exits
Scroll mode and leaves the clip as it was previously.
 Press EXIT AS IS if you’ve found a grade that works for the current clip. This exits Scroll
mode and copies the scrolled grade.
When you press the TOGGLE DECK KEYS soft key in Scroll mode, each of
the Transport Control buttons on the Search Dial panel functions as a means
of previewing the grades of other clips in the Timeline.
NEXT CLIP: Move to the next clip and preview its grade.
PREV CLIP: Move to the previous clip and preview its grade.
FWD: Plays (scrolls) forward at 1 scene per second, previewing
each new grade as it appears.
REV: Play (scrolls) the clips in reverse at 1 scene per second,
previewing each new grade as it appears.
FFWD: Shuttles (scrolls) forward through the Timeline at 4 scenes
per second, previewing each new grade as it appears.
RWD: Shuttles (scrolls) reverse through the Timeline at 4 scenes
per second, previewing each new grade as it appears.
55Copying Grades Using the Advanced Panel