dCS Bartók DAC User Manual Software Issue 1.0x
February 2019
Bartok DAC Manual v1_0x Page 18 English version
Playing music with AirPlay
When the DAC is connected to a network, music can be streamed from an Apple device via AirPlay to
the DAC. When AirPlay is active, the DAC’s Network input is automatically selected.
!
The lower Output Level settings are intended to prevent accidents when driving the
amplifiers directly and AirPlay is in use, as the volume set by the sending device can be
very high.
Using the Bartók DAC with Spotify Connect
If you have a Spotify account, make sure you have checked Spotify in the Preferences > Favourite
Inputs page.
Spotify lets you listen to millions of songs – the artists you love, the
latest hits and discoveries just for you.
If you are a Spotify user, you can control the DAC using your Spotify App.
1. Connect the DAC to the same Wi-Fi network as your phone, tablet or PC running the Spotify app.
2. Open the Spotify app and play any song.
3. Tap the song image at the bottom of the screen.
4. Tap the Connect icon.
5. Pick the Bartók DAC from the list.
For further information on how to set up and use Spotify Connect, please visit
www.spotify.com/connect
Licenses
The Spotify Software is subject to third-party licenses found here:
www.spotify.com/connect/third-party-licenses.
Using the Bartók DAC with Tidal
If you have a Tidal account, make sure you have checked Tidal in the Preferences >
Favourite Inputs page. Go to the Home page and tap the Tidal icon to access music
over the internet through Tidal.
To create and store Tidal playlists, please use the Tidal app directly.
www.tidal.com
Using the Bartók DAC with Roon
The Bartók DAC is Roon Ready. If you have a Roon account, you need to install Roon
server on your NAS drive or on a networked PC. You can then use Roon remote to
control playback. Roon requires a fairly powerful processor, so please check the Roon
website when choosing a NAS drive.
https://roonlabs.com/
To Next Page
Loading...
