DCS Bartok - INFORMATION Menu; Unit Status; Version; Contact

dCS Bartók DAC User Manual Software Issue 1.0x
February 2019
Bartok DAC Manual v1_0x Page 40 English version
INFORMATION Menu
Unit Status
The Unit Status page displays:
• The long version of the serial number, including the hardware configuration code.
• The unit’s network name.
• The internal temperature ....°C.
• The IP address of the unit (if it is connected to a network).
• Each Word Clock input and the clock frequency detected on that input.
• Each input and the sample rate detected on that input.
• For MQA data, the final rendered sample rate.
Use the ◄ ► buttons to scroll up or down the list. This page does not time out, press the
Menu button to exit.
If your system is not behaving as you expect, the Unit Status page can help you find set-
up or connection errors.
Version
The Version page displays the software versions loaded in the unit. Please have this
information ready if you contact your dealer for any reason:
• Main: 1.0x - this is the main software version
• Network: xxx - the network firmware version
This page does not time out, press the Menu button to exit.
Contact
The Contact page displays the dCS web-site URL and support email address. This page
does not time out, press the Menu button to exit.
If you have any difficulty, please contact your dealer for help first.
Update
The Bartók DAC is intended to be updated over the internet using the Bartók app (see
page 51) – this is the easiest way to do it. This feature is provided for emergency use
only. We do not promise to make CD Update files available for all versions.