8.3.3 Changing the room temperature temporarily
Regardless of the operating mode selected for a zone, it is possible to
modify the room temperature for a defined period. Once this time has
elapsed, the selected operating mode will restart.
1. Select the icon for the zone to be modified; , for example.
2. Select Short temperature change.
3. Define the duration in Hour and in Minute.
4. Set the Temporary room setpoint per zone parameter.
8.3.4 Timer programming for heating
Activating timer programming mode
In order to be able to use a timer programme, it is necessary to activate
the Scheduling operating mode. This is activated for each zone
individually.
1. Select the icon for the zone to be configured, , for example.
2. Select Zone configuration > OperatingZoneMode > Scheduling.
Creating a timer programme for heating
A timer programme can be used to vary the room temperature in a living
zone depending on activities during the day. This can be programmed for
each day of the week.
1. Select the icon for the zone to be programmed, , for example.
2. Select Zone configuration > Heating Schedule.
3. Select the programme to be modified.
The programmed activities for Sunday are displayed.
The last activity of the day remains active until the first activity of the
following day.
4. Select the day to be modified.
5. Carry out the following actions according to your needs:
Modify the timings for programmed activities.
Add a new activity.
Delete a programmed activity (choose the activity "Delete").
Copy programmed daily activities to other days.
Modify temperatures linked to an activity.
Selecting a timer programme
In the Timer programming operating mode, three programs are available
per zone. Each program is independent.
To select a timer programme for a zone:
1. Select the icon for the affected zone, , for example.
2. Select Scheduling.
3. Select the desired timer programme.
8.4
Domestic hot water temperature
8.4.1 Choosing the domestic hot water operating mode
For the production of domestic hot water, you can choose between five
operating modes.
1. Select the icon for the DHW zone.
Fig.27
Heating Schedule
Zone setup Z...
14 : 23
Sunday
6:00 House
20.0°C
Edit schedule entry
6:00
House 20.0°C
22.00
Nuit
16.00°C
Add time and Activity
Copy to other day
Set activity temperatures
MW-5000770-2
8 Commissioning
7703592 - v02 - 14062018 33
To Next Page
Loading...
Need help?
General