46
13.6 VIDEO TAMPERING
RIGHT CLICK MENU > DEFENDER 4K MENU > CAMERA SETTINGS
This section allows you to set parameters for system alerts when a camera has been tampered with.
1. Use the Camera drop-down to select a camera.
2. Click the Enable Video Tampering Detection checkbox to allow for detection.
3. Click the Settings to apply an action when the DVR detects tampering on the camera.
4. Use the slide bar to set the Sensitivity level for tampering detection.
The greater the sensitivity
(closer to the right side) the more sensitive to motion the system will be.
5. Click Apply to save these settings.
6. Use the Copy function to apply these setting to other cameras.
To Next Page
Loading...
