10
Basic Setup
Connecting additional devices
Connecting a USB mouse
• Plug USB mouse into top USB port on back of DVR.
Connecting a TV/monitor
Using RCA cable to TV
1. Connect the BNC to RCA connector to the top VIDEO OUT
connection on the back of the DVR.
2. Plug the RCA cable into the BNC connector.
3. Attach the other end of the RCA cable to a yellow RCA video
input on your TV.
4. Switch the TV source to view the DVR. (Consult the TV
manual for instructions on how to switch the video source).
Using HDMI or VGA cable
HDMI - Connecting your DVR to your television via HDMI cable is
the best way to transmit high-definition video from the device to
your television.
1. Connect one end of HDMI cable to the back of the DVR.
2. Connect the other end to the TV or Monitor.
3. Make sure your TV or Monitor is set to the correct Input/
Source setting so the DVR display is visible.
VGA - You can connect your DVR to a computer monitor via VGA
cable (TVs do not usually have this connection available).
1. Connect one end of VGA cable to the back of the DVR.
2. Connect the other end to the computer monitor.
* If connected to a TV via VGA, make sure your TV is set to the
correct Input/Source setting so the DVR display is visible.
HDMI
VGA
To Next Page
Loading...
Need help?
General
