Defender Pro Widescreen DVR - Page 38

38
Main Menu
Setting AUTO REBOOT schedule:
1. Select the REBOOT drop down list and choose Every Week, Every Day or Every Month.
2. Select the DAY drop down list and choose a day of the week.
3. Left click in the box next to the day of the week to enter a TIME and a keyboard will appear.
4. Enter the TIME you would like the reboot to occur then click the ENTER key .
5. Click APPLY at the bottom of the screen to save your changes.
Update
A system update can be done if there is new software available for your DVR model.
System UPDATE:
1. Download the upgrade files from www.defender-usa.com and put the files onto your USB flash drive.
2. Ensure the DVR is powered down.
3. Insert the USB flash drive into the back of the DVR and power up the DVR.
4. Go to the Main Menu and click on ADVANCED.
5. Click UPDATE and click OK to confirm. This may take up to 10 minutes.
6. Once the update is complete, your DVR will restart with the new software update.
Default Settings
Loading default settings will restore all settings on your DVR to the default settings except for the date and time. The
DEFAULT USERNAME is admin and the DEFAULT PASSWORD is 123456.
1. Click the LOAD DEFAULT button and a box will appear.
2. Click the box for each function that will be restored to default parameters or click ALL to select them all. Click
CLEAR to uncheck the boxes.
3. Click APPLY at the bottom of the screen to update your changes.
4. A screen will appear asking "ALL SETTINGS WILL BE LOST. RETURN TO DEFAULT SETTINGS?".
5. If you want to continue and restore the default settings, select OK, if not, select CANCEL.
6. If you select OK, the DVR will take a few minutes to load the default settings.
7. Once loaded, the DVR will reboot automatically and the factory default settings will be set.
Shut Down
1. Click the SHUT DOWN button.
2. A screen will appear asking for confirmation to SHUTDOWN. Select OK to continue or CANCEL to quit.
3. A message " YOU MAY NOW POWER OFF" will appear. You can now safely UNPLUG the power supply to the DVR.
Note: A software update should only be done if a DEFENDER® representative recommends it.