01/10/2021 ASSEMBLY INSTRUCTIONS MLD Control EC-6 with CCB III Page 13
3.2 CCB: Function
General:
One CCB can be used to control up to 100 DEGER systems from a central location.
Joystick:
Automatic mode is deactivated once the joystick is operated. Any system connected to the CCB will move in
the direction indicated by the joystick.
For example, the modules can all be set flat, for maintenance work (mowing grass), or at a steep incline, for
manual snow removal.
The system will switch back to automatic mode once the joystick is returned to the neutral position (0).
Wind monitor + snow sensor:
A wind monitor and snow sensor do not have to be installed on every DEGER system when a CCB is used
in a solar energy plant that has several systems. One snow sensor and one wind monitor can be used for up
to 100 DEGER systems.
To Next Page
Loading...