Deif PPM 300 - Relay Output Wiring

Figure 6.50 Example of shielded wire for compliance with EN60255-26
12/24 V DC
0 V DC
Digital
signal
COM
> 10 m
Figure 6.51 Example of closed contact for compliance with EN60255-26
12/24 V DC
0 V DC
COM
> 10 m
6.8.7 Relay output wiring
The following diagram shows the connection of the relay output to an external relay. For the wiring shown, there is no voltage on the
external relay when the controller relay is open.
INSTALLATION INSTRUCTIONS 4189340909I UK Page 103 of 144