Deif PPM 300 - Mounting the Display Unit; Display Unit Dimensions; Display Unit Panel Cutout

3.4 Mounting the display unit
3.4.1 Display unit dimensions
The diagram below shows a first-angle projection of the display unit, with dimensions. Dimensions are in mm (followed by
approximate dimensions in inches).
233.4 (9.2)
173.4 (6.8) 158.2 (6.2)
218.2 (8.6)
43.3 (1.7)
8.0 (0.3)
178.0 (7.0)
238.0 (9.4) 52.4 (2.1)
3.4.2 Display unit panel cutout
The panel cutout required is L 220.0 mm × H 160.0 mm, with tolerance +0.4 mm and -0.0 mm (L 8.66 in × H 6.30 in, +0.02 in and
-0.00 in).
The following drawing shows the panel cutout with a shadow of the display unit as viewed from the back (that is, from inside the
panel), with dimensions. Dimensions are in mm (followed by approximate dimensions in inches).
INSTALLATION INSTRUCTIONS 4189340909I UK Page 24 of 144