Deif PPM 300 - Analogue Current or Resistance Inputs Wiring

12/24 V DC
0 V DC
COM
W
R
6.6.9 Analogue current or resistance inputs wiring
The I/O configuration determines whether the input is current or resistance. For resistance, the I/O configuration also determines the
type of resistance input.
Current input
The current input may be either active or passive, and a combination of active and passive inputs may be used.
Figure 6.32
Connection of an active transducer
I
12/24 V DC
0 V DC
+
-
+
-
INSTALLATION INSTRUCTIONS 4189340909I UK Page 87 of 144