Deif PPM 300 - Rack Drilling Template

228.9 (9.01)
230.1 (9.06)
212.9 (8.38)
172.0 (6.77) 190.2 (7.49)
139.3 (5.48)
137.3 (5.40)
168.0 (6.61)
157.5 (6.20)
155.0 (6.10)
Ø17.2 (0.68)
Ø7.0 (0.28)
3.3.2 Rack drilling template
Use the dimensions given in the drawing below to create a drilling template. You cannot create an accurate drilling template by
printing this page.
INSTALLATION INSTRUCTIONS 4189340909I UK Page 18 of 144