Deif PPM 300 - 9 Wiring the Display Unit; Display Unit Overview and Wiring; Display Unit Terminal Overview

9. Wiring the display unit
9.1 Display unit overview and wiring
9.1.1 Display unit terminal overview
Figure 9.1
Back of display unit DU 300, with the terminal positions
Table 9.1 Display unit electrical terminals
Terminal Symbol Type Name
F/G Ground Frame ground
1 12 or 24 V DC (nominal) Power supply (+)
2 0 V DC Power supply (-)
3
Relay output (30 V DC and 1 A) Future use 4
5
6
Relay output (30 V DC and 1 A)
Status OK (+)
7 Status OK (-)
INSTALLATION INSTRUCTIONS 4189340909I UK Page 129 of 144