Deister electronic proxSafe C4 - Page 14

6 On the display information is given
about the name of the user, a note
that the keyTag can be taken out, the
name of the keyTag and the slot
number of the corresponding
proxCylinder. You may now take the
keyTag with attached key(s) out off the
marked proxCylinder.
7 Press red button on the keypad to
cancel the take out-routine here. The
proxCylinder now locks the keyTag
again.
8 The removal is shortly acknowledged
on the display of the Terminal,
together with the information about
the name of the user and the name of
the keyTag with the according slot
number of the proxCylinder.
Afterwards the selection menu is shown again and further keyTags can be selected and
taken as described above.
14 ps_terminalc4_em v250909
proxSafe Terminal C4
John Smith
Please remove key
Depot 0003
C:Cancel
F:Menu
John Smith
Depot 0003
removed!
C:Cancel