7.4 Device Manager
For managing connected devices there are further options within the submenu “4 Device
Manager” of the functional menu. In this menu information can be obtained about the
administered devices and their statuses. After successful identification as administrator you
reach the functional menu by pressing the “F”-button.
Moving the arrow keys and confirming your choice by pressing the green button or directly
entering the prefixed number leads you to the submenu “4 Device Manager” of the functional
menu. Here again the following submenus can be selected using the arrow keys on the keypad
and confirming with the green button or directly entering of the prefixed number:
7.4.1 Device Test
The device test generates a functional check-up of the single (internal) components of the
system such as the reader or of (externally) connected Cabinets or other devices from the
proxSafe family. This allows a quick first fault localization. Select “1 Device Test” from the
submenu “4 Device Manager”:
1 All devices connected to the
Terminal (in this example a proxSafe
maxx Cabinet with 32 proxCylinders)
are checked one after another as
after a restart. During this test the
name of the component, that is
currently checked, is shown on the
display. Afterwards further
information is given about e.g. the
number of proxCylinders or type of
the card reader (i.e. the card reader
functionality of the combination
reader). The information is
completed with an “ok”-symbol of
the device status.
v250909 ps_terminalc4_em 31
proxSafe Terminal C4
1Device Test
2 Alarm Status
3 Readdress Cabinets
Device check ...
01.MAXX32 8 8 8 8
Card Reader 206A
keytag Reader
To Next Page
Loading...