Deister electronic proxSafe C4 - 5.2 Return keyTags without Identification

5.2 Return keyTags without Identification
In this case the returning of keyTags is managed without person-related identification by
ident card or PIN. This way the keyTag only has to be presented in front of the reader.
After successful identification of the keyTag (i.e. if the presented keyTag is actually
assigned to one of the proxCylinders of this particular Terminal) the roller shutter
automatically rolls up and the proxCylinder assigned to this keyTag is being illuminated by
a red light.
1 The display then gives the information
that the current user is unknown, a
short notice that a keyTag shall be
returned, the name of the keyTag and
the slot number of the according
proxCylinder. The keyTag may now be
inserted into the proxCylinder.
2 Successful return of the keyTag is
shortly acknowledged on the display of
the Terminal. The (unknown) user is now
requested to return (possible) further
keyTags.
In case there are still keyTags missing in the Cabinet, proceed in the same way in order to
return further keyTags.
18 ps_terminalc4_em v250909
proxSafe Terminal C4
Unknown User
Depot
returned!
Unknown User
Please return keyTag
Depot
into Slot 0003