Deister electronic proxSafe C4 - 7.2 Assignment of User Cards; 7.2.1 Assign User Cards

7.2 Assignment of User Cards
The assignment of user cards to new users in the submenu “2 Assign User Card” of the
functional menu can only be carried out after the new user has been established within the
Commander Software. All users can only be seen on the display with their names and are able
to be assigned to ident cards after this establishment and following synchronization of the
Commander Software with the Terminal.
Note:
Only those users will be listed on the display that have been assigned to this
particular Terminal with ident cards or ident cards in combination with PIN
within the Commander Software before.
7.2.1 Assign User Cards
Successful identification as administrator allows you to reach the functional menu by
pressing the “F”-button. Moving the arrow keys and confirming your choice by pressing the
green button or directly entering the prefixed number leads you to the submenu “Assign
User Card”. In this menu new users can be assigned to user cards and existing user card-
assignments can be deleted or reorganized.
v250909 ps_terminalc4_em 23
proxSafe Terminal C4