10. Error Messages
Possible error messages, that may appear during take out and returning of keyTags:
Message/Problem Possible Cause Solution of Problem
Taking keyTags
Sorry!
No more keyTags available!
All of the keyTags assigned to this
user have already been taken or the
assignment of the desired keyTag to
the registered user has been deleted
in the meantime.
The desired keyTag has to be
newly assigned to the user within
the Commander Software. After
synchronization with the
Terminal the access will be
possible again.
Access Denied The assignment of the registering
user to this Terminal has been
deleted within the Commander
Software.
Reassignment of this Terminal to
the registered user can only be
carried out within the
Commander Software.
Invalid Time Slot 1. The access to the Terminal takes
place outside the defined time
frame for the registering user.
Changes can only be carried
out within the Commander
Software.
2. The access to the Terminal takes
place outside the defined time
frame for the desired keyTag.
Changes can only be carried
out within the Commander
Software.
Returning keyTags
Slot not available! The slot within the proxSafe device
is occupied by another keyTag.
Another keyTag has been
inserted into the wrong
proxCylinder (not assigned to
this keyTag) in spite of a
warning tone.
After successful registration as
administrator the falsely returned
keyTags can be released (see
7.5.1 “Release all keyTags” and
7.5.2 “Release wrong
keyTags”). These keyTags have
to be returned correctly.
Sorry!
No more keyTags available!
All keyTags assigned to the
registered user have already been
returned to the proxSafe device.
Please remove keyTag from Slot
[...] and return it to Slot [...].
The keyTag was returned to the
wrong proxCylinder.
Please follow the instructions
given.
v250909 ps_terminalc4_em 37
proxSafe Terminal C4
To Next Page
Loading...