Deister electronic proxSafe C4 - Delete Assignments of User Cards

1 Select the user you want to assign a
new user card to by moving the arrow
keys.
2 The display shows the selected user
with name and consecutive number. In
the third line of the display there must
be no entry. In case there is an entry,
the existing assignment has to be
deleted before.
3 Please confirm the assignment of the
user to a user card by pressing the
green button on the keypad.
4 The display then asks you to present
the user card in front of the reader.
Please enter the user card into the field
of the reader now and the new
assignment will be stored instantly. For
further assignment of user cards
proceed in the same way.
5 After successful assignment a short
acknowledgement “Card o.k.” is given in
the third line.
6 Press green button on the keypad if
you want to delete this new assignment
again.
7 Press red button in order to cancel the
user card-assignment routine.
Only those users can be assigned to a user card, that have not been assigned to a user
card before. If you want to change the assignment of a user to a card, you have to delete
the existing assignment before. Only after this deletion you can proceed with the new
assignment as described above.
7.2.2 Delete Assignments of User Cards
Successful identification as administrator allows you to reach the functional menu by pressing
the “F”-button. Moving the arrow keys and confirming your choice with the green button or
directly entering the prefixed number leads you to the submenu “2 Assign User Card”.
24 ps_terminalc4_em v250909
proxSafe Terminal C4
User Assignment 0005
John Smith
----------
:Scroll  :Assign
Please present
the card
--------
C:Cancel
User Assignment 0005
John Smith
Card o.k.
:Scroll  :Delete