Important:
Only those keyTags can be assigned, that are not currently assigned to
other proxCylinders. In order to change an assignment of a keyTag to a
proxCylinder the existing assignment has to be deleted before . Only after
this deletion a new assignment is possible as described above.
7.1.2 Delete assignment of keyTags
If the existing assignment of a keyTag to a proxCylinder should be deleted, the keyTag
must be taken out of the proxCylinder before. After identification as administrator you
reach the functional menu by pressing the blue “F”-button. Moving the arrow keys and
confirming your choice by pressing the green button or directly entering the prefixed
number leads you to the submenu “1 Assign keyTag” again.
1 Select the menu item “Assign keyTag”
by confirming with the green button.
2 Use the arrow keys in order to select
the keyTag position which you want to
delete the assignment for.
3 In the third line of the display, where
the number of the keyTag is shown,
there must be an entry.
4 Confirm your intention to delete this
assignment by pressing the green
button on the keypad again.
5 The display asks you for safety
reasons, if you are sure that you want
to delete. Confirm again by pressing
the green button and the selected
assignment of the keyTag to the
proxCylinder will be deleted. Now you
can assign a new keyTag to this free
position again (see 7.1.1 “Assign
keyTags”).
6 Press the red button on the keypad in
order to cancel the deletion process of
the keyTag assignment.
22 ps_terminalc4_em v250909
proxSafe Terminal C4
1Assign keyTag
2 Assign User Card
3 Configuration
4 Device Manager
keyTag Assign. 0015
cellar
00303D98
:Scroll :Delete
Do you really
want to delete
the assignment?
C:No! :Yes
To Next Page
Loading...