2.3 System Information
Information about the serial number, the hard-/software version and the addressing of the
Terminal as well as of the connected devices and the reader is directly available at the
Terminal, after the green button has been pressed on the keypad, starting from the first
display (see 3.1 “Display in standard working mode”).
The arrow keys give you access to information about other connected proxSafe devices.
1 The serial number of the Terminal C4
(TRM) is 803. It can also be found on
the serial plate on the Terminal. The
software version is 2.20. The
addressing of the Terminal is done by
the bus address 21. The version of the
coprocessor of the Terminal is 1.06
and is shown at the end of the second
line on the display.
2 The version of the card-reader (RDR) is
1.03 and the device type of the reader
is 206A (=mifare
®
reader).
3 The information given on the display
is about Cabinet 1 (CAB) from 2
(possible) Cabinets. The software
version of the Cabinet is 0.01.
The addressing of this Cabinet is
carried out by bus address 23.
4 The type of the connected device is a
proxsafe maxx
®
Cabinet with 32
proxCylinders and the hardware
version is 3.01.
v250909 ps_terminalc4_em 7
proxSafe Terminal C4
TRM 803 v2.20 - 21
RDR v1.03 206A v1.06
CAB 01/02 v0.01 - 23
MAXX32 HV3.01
To Next Page
Loading...