Deister electronic proxSafe C4 - 7. Functional Menu; 7.1 Assignment of keyTags; 7.1.1 Assign key Tags

7. Functional Menu
Various functions can be carried out at the Terminal, such as the assignment of keyTags or
assignment of users, the settings (configuration) of the Terminal, the device manager or the
complete release of all keyTags or all wrongly returned keyTags. All these settings and
changes are only possible with according authorization as administrator either by
presenting an administrator card or by entering an administrator PIN. After successful
identification (as administrator) the display shows “F:Menu” in the bottom line of the
display. Pressing the blue F-button on the keypad calls for the functional menu, which is
again divided into six submenus for further editing:
1 For further editing select the wanted
submenu by using the arrow keys on
the keypad or by directly entering the
number of the submenu.
7.1 Assignment of keyTags
The assignment of keyTags can be accomplished in the first submenu “1 Assign keyTag” of the
functional menu, which includes the assignment of new keyTags to existing (labelled) positions of
proxCylinders, the deletion of existing assignments and reorganization of the same.
7.1.1 Assign keyTags
After successful identification as administrator you reach the functional menu with the blue
“F”-button.
20 ps_terminalc4_em v250909
proxSafe Terminal C4
1Assign keyTag
2 Assign User Card
3 Configuration
4 Device Manager 
5 Release keyTags
6 Switch Demo on
Restart