4 Pressing the green button for “View” will
show more details such as the specific
date and time at which the alarm was
caused. If the specific alarm can be
traced back to a certain keyTag, the
arrow keys allow toggling between user
and keyTag information in the 2
nd
line
of the display.
5 Pressing the blue “F”-button gives you
again the possibility to clear this alarm.
For safety reasons the displays asks for a
repeated entry of either “C” for “no
cancelling” or pressing the green button
for “Yes – cancelling”.
The assignment of alarm events to the four relays is as follows:
Relay 1: Access Violation
Taken by override
User Time Limit
keyTag Time exceeded
keyTag Duration
Relay 2: Faulty Operation
Wrong Slot Return
Misuse of Keypad
Relay 3: Power Supply
Main Power Failure
Low Battery
Relay 4: Tampering
Tamper Wall
Tamper Service
Door/Shutter forced
Door/Shutter Error
v250909 ps_terminalc4_em 33
proxSafe Terminal C4
Alarm 3 Cabinet 01
Unknown User
We 24.07.06 09:15:10
F:Clear
Alarm 3 Cabinet 01
Really cancel the
selected alarm(s)?
C:NO :YES
To Next Page
Loading...