Dell EMC ES40 User Manual

Figure 4 Removing the DC power cord
Spring
Release
CL5060
3. Turn the captive screw counterclockwise to release the power cooling module, and remove
the module.
NOTICE To protect a running system from overheating, the enclosure will power down
unless you replace the power cooling module within two minutes.
Figure 5 Removing a power cooling module
CL5662
21
Installing power cooling module
This procedure describes how to install a power cooling module in the DAE.
Before you begin
Procedure
1.
Install the power cooling module in the enclosure:
a. Gently insert the new power cooling module into the enclosure, being sure the module is
completely seated.
b. Secure the module with the captive screw.
Removing and replacing FRUs
20 Dell EMC ES40 Expansion Shelf Guide Field Replacement Unit Guide

Dell EMC ES40 Specifications

General

Brand	Dell EMC
Model	ES40
Category	Indoor Furnishing
Language	English