Figure 29 Removing the screws that secure the enclosure to the front of the cabinet
Rear
Front
Screw (2)
Screw (2)
CL4728
2. With help from another person, slide the enclosure out of the cabinet and place it on a
static-free work surface (Figure 30 on page 41).
Figure 30 Sliding the enclosure out of the cabinet
Installing an empty shelf on the rails
Procedure
1.
Lift the enclosure and, from the front of the rack, slide the enclosure onto the rails.
Removing and replacing FRUs
Dell EMC ES40 Expansion Shelf Guide Field Replacement Unit Guide 41