Dell EMC ME4 Series - Page 102

Number Severity Description/Recommended actions
Info. A scrub-disk job logged with event 208 has completed and found no errors, or a disk being scrubbed (with no
errors found) has been added to a disk group, or a user has aborted the job.
Recommended actions:
• No action is required.
210 Info. All snapshots have been deleted for the indicated parent volume when using virtual storage.
Recommended actions:
• No action is required.
211 Warning SAS topology has changed. No elements are detected in the SAS map. The message species the number of
elements in the SAS map, the number of expanders detected, the number of expansion levels on the native
(local controller) side and on the partner (partner controller) side, and the number of device PHYs.
Recommended actions:
• Perform a rescan to repopulate the SAS map.
• If a rescan does not resolve the problem, then shut down and restart both Storage Controllers.
• If the problem persists, see Resources for diagnosing and resolving problems.
Info. SAS topology has changed. The number of SAS expanders has increased or decreased. The message species
the number of elements in the SAS map, the number of expanders detected, the number of expansion levels
on the native (local controller) side and on the partner (partner controller) side, and the number of device
PHYs.
Recommended actions:
• No action is required.
216 Info. An uncommitted snapshot has been deleted. Removal of the indicated snapshot completed successfully.
Recommended actions:
• No action is required.
217 Error A supercapacitor failure occurred in the controller.
Recommended actions:
• Replace the controller module that logged this event.
218 Warning The supercapacitor pack is near end of life.
Recommended actions:
• Replace the controller module reporting this event.
219 Info. Utility priority has been changed by a user.
Recommended actions:
• No action is required.
232 Warning The maximum number of enclosures allowed for the current conguration has been exceeded.
The platform does not support the number of enclosures that are congured. The enclosure indicated by this
event has been removed from the conguration.
Recommended actions:
• Recongure the system.
102 Events and event messages