Number Severity Description/Recommended actions
249 Info. After a valid license is installed, this event is logged for each licensed feature to show the new license value for
that feature. The event species whether the feature is licensed, whether the license is temporary, and
whether the temporary license is expired.
Recommended actions:
• No action is required.
250 Warning A license could not be installed.
The license is invalid or species a feature that is not supported on your product.
Recommended actions:
• Review the readme le that came with the license. Verify that you are trying to install the license in the
system that the license was generated for.
251 Info. A volume-copy operation has started for the indicated source volume.
Do not mount either volume until the copy is complete (as indicated by event 268).
Recommended actions:
• No action is required.
253 Info. A license was uninstalled.
Recommended actions:
• No action is required.
255 Info. The PBCs across controllers do not match as PBC from controller A and PBC from controller B are from
dierent vendors.
This may limit the available congurations.
Recommended actions:
• No action is required.
259 Info. In-band CAPI commands have been disabled.
Recommended actions:
• No action is required.
260 Info. In-band CAPI commands have been enabled.
Recommended actions:
• No action is required.
261 Info. In-band SES commands have been disabled.
Recommended actions:
• No action is required.
262 Info. In-band SES commands have been enabled.
Recommended actions:
• No action is required.
263 Warning The indicated spare disk is missing. Either it was removed or it is not responding.
Events and event messages 105
To Next Page
Loading...
